[Free] 2018(Jan) Latesttests Passguide Oracle 1z0-404 Dumps with VCE and PDF 1-10

Latesttests
2018 Jan Oracle Official New Released 1z0-404
100% Free Download! 100% Pass Guaranteed!
http://www.Latesttests.com/1z0-404.html

Oracle Communications Session Border Controller 7 Basic Implementation Essentials

Question No: 1

The Session Border Controller ACLI is structured in a way that separates configuration of layers 3,4, and 5. This allows the system administrator to link each configuration together as needed for signaling and media routing purposes.

Which two options are valid to link signaling and media interfaces to a realm? (Choose two.)

  1. Navigate to the iwf-config configuration element and set the media-interface-id parameter to the realm name.

  2. Navigate to the account-config configuration element and set the realm-id parameter to the realm name.

  3. Navigate to the network-interface configuration element and set the sip-interface-id parameter to the realm name.

  4. Navigate to the steering-pool configuration element and set the realm-id parameter to the realm name.

  5. Navigate to the sip-interface configuration element and set the realm-id parameter to the realm name.

Answer: A,B

Question No: 2 CORRECT TEXT

Which statement is true about the Host In Path (HIP) feature In the Session Border Controller?

Answer: By default, theSession Border Controller#39;s FTP, ICMP, SNMP, and Telnet services cannot be accessed via the management interfaces.

Answer: To enable these services (FTP ICMP, SNMP, and Telnet services), the enable host-in-path command must be executed from the superuser mode.

Answer: To enable these services, the Session Border Controller includes a software license that enables administrative traffic over the media interfaces.

Answer: By default, the Session Border Controller#39;s FTP, ICMP, SNMP, and Telnet services cannot be accessed viathe media interfaces.

Answer: These four fields (FTP, ICMP, SNMP, and Telnet services) are collectively known as the Host Interface Priority.

Answer: A

Reference https://docs.oracle.com/cd/E52358_01/doc/sbc_scx620_acliconfiguration.pdf

Question No: 3

Which configuration step is required to route a SIP callbased on the value of the SIP INVITE Request-URI?

  1. Navigate to the policy-attribute configuration element and configure the from-address parameter to match the Request-URI value.

  2. Navigate to the policy-attribute configuration element and configure the to-address parameter to match the Request-URI value.

  3. Navigate to the local-policy configuration element and configure the from-address parameter to match the Request-URI value.

  4. Navigate to the local-policy configuration element and configure the to-address parameter to match the Request-URI value.

  5. Navigate to the local-policy configuration element and configure the destination-address parameter to match the Request-URI value.

Answer: C

Question No: 4

Your Session Border Controller is configured as the source and destination for all signaling messages and media streams coming into and leaving the provider’s network.

Which two SIP functions does it provide? (Choose two.)

  1. an IP edge router

  2. Back-to-Back User Agent (B2BUA)

  3. Edge proxy

  4. Data firewall

  5. Media gateway

Answer: B,D

Question No: 5

To return the Session Border Controller configuration to a known, factory default state, you must .

  1. press the reset button on the front panel

  2. issue the delete-configcommand

  3. issue the set-system-state offline command

  4. issue the set-system-state offline

  5. issue the delete-config and reboot commands

Answer: E

Question No: 6

You want to view an existing multiple-instance element’s configuration.

What step should you perform after you go to the correct branch of theconfiguration tree?

  1. Select the element and then issue the show command.

  2. Type show lt;element namegt;.

  3. Type show ? and select from the displayed list.

  4. Type is -a.

  5. Enter the name of the element and then issue the show command.

Answer: E

Question No: 7

You want to prevent the Session Border Controller from generating aunique Call-ID and from modifying the dialog tags.

How would you accomplish this?

  1. Navigate to the sip-interface configuration element and set the dialog-transparency parameter to disabled.

  2. Navigate to the sip-config configuration element and set the dialog-mapping parameter to disabled.

  3. Navigate to the sip-config configuration element and set the call-id-transparency parameter to disabled.

  4. Navigate to the sip-config configuration element and set the dialog-transparency parameter to disabled.

  5. Navigate to the sip-config configuration element and set the dialog-transparency parameter to enabled.

Answer: E Explanation:

Reference http://luccisun.webfactional.com/sbc/SBC/NNSBCNOTE.html

Question No: 8

What is the effect of executing the save-config command in superuser mode?

  1. The running configuration version is reset to 1.

  2. The running configuration version does not increase and is equal to thesaved configuration version.

  3. The saved configuration version increases by 1 and is higher than the running configuration version.

  4. The running configuration version increases by 1 and is higher than the saved configuration version.

  5. The editing configuration version increases by 1 and is higher than the saved configuration version.

Answer: C

Question No: 9

What should you do to enable physical interface redundancy?

  1. Navigate to the system-config configuration element and set the phy-redundancy parameter to enabled.

  2. Navigate to the network-interface configuration element and set thephy-redundancy parameter to enabled.

  3. Navigate to the network-interface configuration element and set the link-redundancy- state parameter to enabled.

  4. Navigate to the system-config configuration element and set the link-redundancy-state parameter toenabled.

  5. Run the superuser command enable phy-redundancy.

Answer: C

Question No: 10

You are configuring access rules in a Session Border ControllerPeering architecture.

Which two configuration steps are required to allow access only from User Agents (UAs) configured as session agents? (Choose two.)

  1. Navigate to the sip-port configuration element and set the allow-anonymous parameter to all.

  2. Navigate to the session-agent configuration element and set the ip-address parameter to the IP subnet of your trusted User Agent (UA).

  3. Navigate to the realm-config configuration element and set the addr-prefix parameter to the IP subnet of your trusted User Agent (UA).

  4. Navigate to the sip-port configuration element and set the allow-anonymous parameter to agents-only.

  5. Navigate to the sip-port configuration element and set the allow-anonymous parameter to address-prefix.

Answer: B,E

100% Free Download!
Download Free Demo:1z0-404 Demo PDF
100% Pass Guaranteed!
Download 2018 Latesttests 1z0-404 Full Exam PDF and VCE

Latesttests ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2018 Latesttests IT Certification PDF and VCE

Leave a Comment

(0 Comments)

Your email address will not be published. Required fields are marked *