[Free] 2018(June) Ensurepass Microsoft 70-642 Dumps with VCE and PDF 221-230

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-642
100% Free Download! 100% Pass Guaranteed!

TS: Windows Server 2008 Network Infrastructure, Configuring

Question No: 221 – (Topic 3)

Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.

Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2. You need to restore the company#39;s Windows SharePoint Services (WSS) site to Server2.

What should you do?

  1. Use Wbadmin to restore the system state from backup.

  2. Run Wbadmin with the Get Versions option. Install WSS.

  3. Run Wbadmin with the Start Recovery option. Install WSS.

  4. Use Wbadmin to restore the application and the sites from backup.

Answer: D

Question No: 222 – (Topic 3)

Your network contains an Active Directory domain named contoso.com. Contoso.com contains three servers.

The servers are configured as shown in the following table.

Ensurepass 2018 PDF and VCE

You plan to give users access to the files shares on Server2 by using DirectAccess. You need to ensure that you can deploy DirectAccess on Server3.

What should you do?

  1. Add a static IPv6 address to DC1.

  2. Add a static IPv6 address to Server2.

  3. Upgrade DC1 to Windows Server 2008 R2.

  4. Upgrade Server2 to Windows Server 2008 R2.

Answer: C Explanation:

  • One or more DirectAccess servers running Windows Server 2008 R2 (with or without UAG) with two network adapters: one that is connected directly to the Internet and one that is connected to the intranet. DirectAccess servers must be a member of an AD DS domain.

  • On the DirectAccess server, at least two consecutive, public IPv4 addresses assigned to the network adapter that is connected to the Internet.

  • DirectAccess client computers that are running Windows 7 Enterprise or Windows 7 Ultimate. DirectAccess clients must be members of an AD DS domain.

  • At least one domain controller and DNS server that is running Windows Server 2008 SP2 or Windows Server 2008 R2. When UAG is used, DirectAccess can be deployed with DNS servers and domain controllers that are running Windows Server 2003 when NAT64 functionality is enabled.

  • A public key infrastructure (PKI) to issue computer certificates, and optionally, smart card certificates for smart card authentication and health certificates for NAP. For more information, see Public Key Infrastructure on the Microsoft Web site.

  • Without UAG, an optional NAT64 device to provide access to IPv4-only resources for DirectAccess clients.

  • DirectAccess with UAG provides a built-in NAT64. http://technet.microsoft.com/en-us/library/dd637797(v=ws.10).aspx

    Question No: 223 – (Topic 3)

    Your network contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2008 R2. The servers have the Network Policy Server (NPS) role service installed.

    You configure a Remote RADIUS Server Group named Group1. Group 1 contains Server2, Server3, and Server4.

    You need to configure load balancing for the members of Group1 to meet the following requirements:

    ->Server1 must send 25 percent of all authentication requests to Server3.

    ->Server1 must send 75 percent of all authentication requests to Server2.

    ->Server1 must only send authentication requests to Server4 if Server2 and Server3 are unavailable.

    What should you do from the Network Policy Server console?

    1. 路 For Server2, set the weight to 75 and the priority to 75,

      • For Server3, set the weight to 25 and the priority to 25.

      • For Server4, set the weight to 100 and the priority to 200.

    2. 路 For Server2, set the weight to 75 and the priority to 1.

      • For Server3, set the weight to 25 and the priority to 1.

      • For Server4, set the weight to 100 and the priority to 100.

    3. 路 For Server2, set the weight to 1 and the priority to 75.

      • For Server3, set the weight to 1 and the priority to 25.

      • For Server4, set the weight to 100 and the priority to 1.

    4. 路 For Server2, set the weight to 75 and the priority to 25.

    • For Server3, set the weight to 25 and the priority to 75.

    • For Server4, set the weight to 100 and the priority to 1.

      Answer: B Explanation:

      RADIUS server priority and weight

      During the NPS proxy configuration process, you can create remote RADIUS server groups and then add RADIUS servers to each group. To configure load balancing, you must have more than one RADIUS server per remote RADIUS server group. While adding group members, or after creating a RADIUS server as a group member, you can access the Add RADIUS server dialog box to configure the following items on the Load Balancing tab:

      Priority: Priority specifies the order of importance of the RADIUS server to the NPS proxy server. Priority level must be assigned a value that is an integer, such as 1, 2, or 3. The lower the number, the higher priority the NPS proxy gives to the RADIUS server. For example, if the RADIUS server is assigned the highest priority of 1, the NPS proxy sends connection requests to the RADIUS server first; if servers with priority 1 are not available, NPS then sends connection requests to RADIUS servers with priority 2, and so on. You can assign the same priority to multiple RADIUS servers, and then use the Weight setting to load balance between them. Weight: NPS uses this Weight setting to determine how many connection requests to send to each group member when the group members have the same priority level. Weight setting must be assigned a value between 1 and 100, and the value represents a percentage of 100 percent. For example, if the remote RADIUS server group contains two members that both have a priority level of 1 and a weight rating of 50, the NPS proxy forwards 50 percent of the connection requests to each RADIUS server.

      Advanced settings: These failover settings provide a way for NPS to determine whether the remote RADIUS server is unavailable. If NPS determines that a RADIUS server is unavailable, it can start sending connection requests to other group members. With these

      settings you can configure the number of seconds that the NPS proxy waits for a response from the RADIUS server before it considers the request dropped; the maximum number of dropped requests before the NPS proxy identifies the RADIUS server as unavailable; and the number of seconds that can elapse between requests before the NPS proxy identifies the RADIUS server as unavailable.

      Reference: http://technet.microsoft.com/en-us/library/dd197433(v=ws.10).aspx

      Question No: 224 – (Topic 3)

      Your network contains a server named DC1 that has the DHCP Server role installed.

      You need to prevent devices that are neither company-owned nor company-managed from being assigned DHCP addresses.

      What should you enable on the DHCP server?

      1. Configure name protection

      2. Modify the start address

      3. Configure DHCP link layer-based filtering

      4. Configure Open Shortest Path First (OSPF) on the router

      5. Reconcile the scope.

      6. Configure Routing Information Protocol version 2 (RIPv2) on the router

      7. Authorize DC1 in Active Directory

      8. Increase the database cleanup interval

      9. Compact the database

      10. Restore the database from a backup

      11. Configure a DHCP Relay Agent

      Answer: C Explanation:

      Link layer filtering provides network access control for the issuance or denial of DHCP leases of IP addresses based on a media access control (MAC) address. Link layer filtering can be configured at the IPv4 node for all clients across all IPv4 scopes. This feature is currently available only for IPv4 networks.

      To enable MAC address filtering Open the DHCP Microsoft Management Console (MMC) snap-in.

      In the console tree, double-click the DHCP server you want to configure, right-click IPv4, and then click Properties.

      Click Filters, and then select the Enable Allow List or the Enable Deny List check box. To configure a new filter

      Open the DHCP snap-in.

      In the console tree, double-click the applicable DHCP server, double-click IPv4, double- click Filters, and then right-click Allow or Deny.

      Click New Filter, and then type a MAC Address and Description. Description is an optional field.

      http://technet.microsoft.com/en-us/library/dd759259.aspx

      Question No: 225 – (Topic 3)

      Your company has multiple DNS servers in the main office. You plan to install DNS on a member server in a branch office.

      You need to ensure that the DNS server in the branch office is able to query any DNS server in the main office, and you need to limit the number of DNS records that are transferred to the DNS server in the branch office.

      What should you do?

      1. Configure a secondary zone on the DNS server in the branch office.

      2. Configure a stub zone on the DNS server in the branch office.

      3. Configure a stub zone on the DNS server in the main office.

      4. Configure a primary zone on the DNS server in the branch office.

      Answer: B Explanation:

      A stub zone is a copy of a zone that contains only those resource records necessary to identify the authoritative Domain Name System (DNS) servers for that zone. A stub zone is used to resolve names between separate DNS namespaces. This type of resolution may be necessary when a corporate merger requires that the DNS servers for two separate DNS namespaces resolve names for clients in both namespaces.

      A stub zone consists of:

      • The start of authority (SOA) resource record, name server (NS) resource records, and the glue A resource records for the delegated zone.

      • The IP address of one or more master servers that can be used to update the stub zone. http://technet.microsoft.com/en-us/library/cc779197(v=ws.10).aspx

        Question No: 226 – (Topic 3)

        Your network contains two servers named Server1 and Server2 that run a Server Core installation of Windows Server 2008 R2. Server1 has the SNMP Service installed.

        You need to ensure that Server2 can send SNMP traps to Server1. What should you do?

        1. On Server2, run dism /online /enable-feature /featurename:snmp-sc.

        2. On Server1, run oclistsnmp-sc.

        3. On Server2, run oclistsnmp-sc.

        4. On Server1, run dism /online /enable-feature /featurename:snmp-sc.

        Answer: A Explanation:

        To install a feature:

        Dism /online /enable-feature /featurename:lt;namegt; To remove a feature

        Dism /online /disable-feature /featurename:lt;namegt; http://technet.microsoft.com/pt-br/library/ee441253(v=ws.10).aspx

        Question No: 227 – (Topic 3)

        Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Print and Document Services server role installed.

        Server1 contains 200 shared printers.

        Currently, none of the shared printers are listed in Active Directory.

        You need to ensure that all of the shared printers on Server1 can be located by searching

        Active Directory.

        Which tool should you use? (Each correct answer presents a complete solution. Choose two)

        1. Setprinter.exe

        2. Printui.exe

        3. Prnmngr.vbs

        4. Print management

        5. Pubprn.vbs

        Answer: D,E

        Explanation: Correct answer(s): D, E

        Print Management provides a single interface that administrators can use to efficiently administer multiple printers and print servers

        http://technet.microsoft.com/en-us/library/cc753109(v=ws.10).aspx#BKMK_3 Pubprn.vbs – Publishes a printer to the Active Directory Domain Services. http://technet.microsoft.com/en-us/library/cc753116(v=ws.10).aspx

        Question No: 228 – (Topic 3)

        Your company has a server named Printer1 that runs Windows Server 2008 R2. Printer1 has the Print and Document Services server role installed.

        You need to reduce the number of events registered in the system log on Printer1. What should you do?

        1. Open the Event Viewer console. Create a custom view for the system log. Exclude the events that are notified by Event ID 10 from the filter.

        2. Open the Print Management console. Open the properties of Printer1 and clear the Log spooler information events option.

        3. Open the Print Management console. Open the properties of Printer1 and clear the Show informational notifications for network printers option.

        4. Open the Print Management console. Open the properties of each individual printer on Printer1 and clear the Enable advanced printing features option.

        Answer: B

        Explanation:

        See sample below:

        Ensurepass 2018 PDF and VCE

        Question No: 229 – (Topic 3)

        Your network contains an Active Directory domain. You have 100 remote users who have client computers that run Windows 7.

        The client computers are joined to the domain. The corporate security policy states that users working offline must be denied access to the files on the corporate file servers.

        You need to configure the network to meet the following requirements:

    • Support the corporate security policy.

    • Minimize the amount of time it takes for remote users to access the files on the corporate file servers.

    What should you enable?

    1. shadow copies on the client computers

    2. shadow copies on the corporate file servers

    3. transparent caching on the corporate file servers

    4. transparent caching on the client computers

    Answer: D Explanation:

    IT professionals can take advantage of the Windows 7 file sharing enhancements to further improve user productivity in branch offices. Windows 7 provides:

    • Transparent caching on client computers for shared folders, reducing the time required to access files for the second and subsequent times across a slow network. This is combined with protocol enhancements that eliminate multiple, redundant network operations when opening or saving files to provide an improved application experience across slow networks.

    • Background synchronization capabilities for offline files, reducing administrative overhead and enhancing end-user experience.

      http://technet.microsoft.com/en-us/library/dd637828(v=ws.10).aspx

      Question No: 230 – (Topic 3)

      Your network contains an Active Directory domain. The domain contains several VPN servers that have the Routing and Remote Access service (RRAS) role service installed.

      You need to collect information about the duration of the VPN connections. The information must be stored in a central location.

      What should you configure on the VPN servers?

      1. connection request policies

      2. the RADIUS Authentication authentication provider

      3. health policies

      4. the RADIUS Accounting accounting provider

      5. remediation server groups

      6. the Windows Accounting accounting provider

      7. system health validators (SHVs)

      8. Group Policy preferences

      9. the Windows Authentication authentication provider

      10. IKEv2 client connections

      Answer: D

      100% Ensurepass Free Download!
      Download Free Demo:70-642 Demo PDF
      100% Ensurepass Free Guaranteed!
      70-642 Dumps

      EnsurePass ExamCollection Testking
      Lowest Price Guarantee Yes No No
      Up-to-Dated Yes No No
      Real Questions Yes No No
      Explanation Yes No No
      PDF VCE Yes No No
      Free VCE Simulator Yes No No
      Instant Download Yes No No

    Leave a Reply

    Your email address will not be published. Required fields are marked *